When the handle wheel is turned clockwise, steam and steam move down through the fluid flow, and the gate is squeezed between the two valve seats, so that no fluid leakage occurs when the valve is completely closed.

Types of butterfly valves: lug type butterfly valve, U-shaped flange butterfly valve, double flange butterfly valve, fluorine-lined PTFE butterfly valve, double eccentric butterfly valve and triple eccentric butterfly valve

The valve seat is responsible for the movement of the valve gate. It can also help to further seal the flowing medium. For gate valves, there are two valve seats according to the type of gate. Take the wedge valve as an example, the valve seats on both si

The stop valve opens and closes the valve with the help of a plug-shaped disc, which is tightly fixed in the valve.

These shut-off valves must not be used for on/off service because it is impossible to achieve a tight seal. The disc in the valve can be completely removed from the flow path, or the flow path can be completely closed.

The gate valve is designed for fully open or fully closed service. They are installed in the pipeline as isolation valves and should not be used as control or regulating valves.

Because of its ability to cut off liquids, gate valves are often used in the petroleum industry. For extremely viscous fluids, special valves commonly called knife valves are used to cut off the liquid. A typical gate valve is designed to be fully open or

In the shut-off valve, the flow of water is controlled by a movable mandrel, and the flow of water is restricted by lowering the mandrel to a fixed valve seat.

Our gate valves are cheap, but durable and reliable. We believe that our deep research and development and rich production experience are important reasons why we are trustworthy.

Gate valves are used in a variety of industrial applications, including oil and gas, pharmaceuticals, manufacturing, automobiles, and ships.

There are many types of gate valves, such as full bore gate valves, parallel disc gate valves, solid wedge gate valves, flexible wedge gate valves, split wedge gate valves, vertical stem gate valves, and non-vertical stem gate valves.

Ball valves and plug valves are very similar in basic functions and applications. Both are control valves used to provide tight shutoff in different types of piping units. They also work on the same basic principle, that is, using a porous disk to start o

The gate valve is an energy-saving valve option because the direction of movement or gate is perpendicular to the direction of medium flow. Therefore, less power is consumed when opening or closing the gate valve compared to the shut-off valve. Because of

Gate valves are widely used in pipelines to transport media. Gate valves can be divided into wedge gate valves, flat gate valves, parallel double gate valves according to the form of valve seats. The product can have a longer service life. It can be insta

Electric actuator ball valves have full-diameter models, some are cavity-filled, and some are V-shaped ball valves. Designed for throttling or switching applications in a variety of industries, including pulp and paper, chemical, power, oil and gas, and m