Home >> YUANDA Valve
Gate valves are usually used in older piping systems and applications that do not require frequent closures. Large water supply lines use gate valves because they have straight flow paths and fewer flow restrictions. Ball valves are increasingly used in new piping systems that need to be closed frequently.
Gate valves are used for slurry and viscous media applications because they are easier to clean and maintain. Ball valves are undesirable because they are difficult to clean and mud particles may damage the rotating ball.
Gate valves are used in high temperature and high pressure environments such as power plants, mining and water treatment.
Ball valves are commonly used in fire protection systems and marine applications. They are best not used in food, beverage, and pharmaceutical applications because ball valves are difficult to clean and can cause contamination.
Introduction to Gate Valves and Gate Valve Types
The full-bore valve specification means that the hole diameter of the valve is not limited in the pipeline. Well, standard (reduced diameter) port valves can cause flow restriction, which can lead to cavitation and pressure loss. Another reason for using full-bore valves is for cleaning.
The parallel seat door assembly consists of two interchangeable spring-loaded discs, a fully guided disc frame and fixed pins. Positioning the valve seat eliminates the stress and potential constraints caused by the thermal expansion of the valve stem.
The wedge-shaped gate valve has a wedge-shaped disc that rests on two inclined valve seats. Solid wedges are used for high flow or turbulent flow applications, such as steam service. The robust design also minimizes vibration and vibration.
The elastic wedge is an integral disc with a cutout on the periphery to improve the ability to correct errors or angle changes between seats. The size, shape and depth of the reduction will vary. The shallow and narrow incision has almost no elasticity, but retains its strength.
Separate wedges can be automatically adjusted and automatically aligned to the sides of the seat. This wedge is composed of a two-piece structure located between the conical valve seats in the valve body. This type of wedges is suitable for processing gases and liquids that do not condense at room temperature, especially corrosive liquids.
Contact US
Related Information
Where globe valve is usedbest gate valvesball valve corrosioncontrol valve manufacturers chinay pattern globe valveflanged gate valve manufacturersglobe valve symbolshow to tell if a gate valve is open or closedhow to refill a leaky globe valvehow a gate valve works4 inch ball valve price1/4 ball valve plasticCast Iron Ball Check Valveforged gate valve manufacturerswhat is a globe valve used forball valves for salegate valve manufacturers1/2 ball valve male femalehow to identify gate and globe valvewhere to place globe valve on an irrigation systemglobe valve flow directionpvc globe valvehow does bellows seal globe valve workMarine Gate Valve Manufacturerswhat is ball valve in plumbingwhat is a gate valve3/4 male threaded ball valvewhat type of flow does a globe valve givewhat is a gate valve used for6 butterfly valveball valve working principle3 Inch Check ValveWhere are solenoid valves usedCast Iron Wafer Check Valvehow does a 3 way mixing globe valve workbutterfly valve symbolCast Iron Silent Check Valve5 inch pvc ball valve8 Inch Check Valvefloating ball valve typeshigh pressure gate valves manufacturerNon Return Valve Suppliers ChinaChina Check Valve SupplierCast Flow Check Valve4 Check Valve Cast Iron
